If your Mercedes Sprinter Radio Display Not Working. So don’t worry, it’s not just you, it’s a common problem. Which many Mercedes owners experience. In this article, we will discuss the steps that can solve your problem. We will also give some useful tips to make it easier.
If your Mercedes Sprinter Radio Display Not Working then keep reading. We can say that you may be able to solve this problem after reading this article. Then you will stay with us.
Mercedes Radio Display Troubleshooting
There are a number of reasons why your Mercedes radio display may not work. We will cover these reasons one by one so that you can find the problem in your car and then they can fix it. Finding the cause of the problem can be very difficult and lengthy. But don’t worry, we will help you.
Software Bug may be the cause
There is also a possibility that the problem is due to a software bug. Mercedes Radio has a software problem with its vehicles. So make sure it is something you should consider. If you find that the radio controls are working properly. But the display is empty, the black screen appears, or if it’s stuck in the Mercedes logo, then the software bug is more likely. In that case, you can do a soft reset to fix the problem.
How to Reset Mercedes Radio?
Resetting the Mercedes command is much easier. All you have to do is hold down the CD Eject button for ten seconds and wait for the Mercedes Boot logo to arrive. You have now reset your system.
Display Fuse Can Cause the Issue
The back of the Mercedes radio unit has a fuse for display. If this fuse blows or breaks. So it stops the power of the display and the radio does not work. If you are having difficulty with your Mercedes radio display. So the first thing you should check is the fuse. This is a very simple solution and all you need to do is replace the blown fuse.
What you need to do to replace the display fuse in a Mercedes.
- Remove the radio unit from the dashboard.
- Disconnect all the wires behind it.
- Find the fuse behind the head unit.
- Remove the blown or damaged air fuse and replace it with a new fuse of the same rating.
You can easily replace the fuse by trying this simple method.
Due to a loose cable connection
One of the reasons why your Mercedes radio display may not work is because of a loose cable connection. When this happens the screen will not show anything. Or it can often turn on and off automatically.
If you encounter such a problem, check that all cables are properly interconnected. If you see a loose cable, try reconnecting and reusing it with the car stereo. When checking the connection, use a multimeter to make sure the cables are generating enough current in the stereo unit.
This will let you know that the connector is in the right place but there is a broken wire in the middle due to which there is not enough current in the unit to operate normally.
Due to bad display
One of the reasons why your Mercedes radio display doesn’t work is because of a broken display. The poor display can be a problem if you know that everything else is fine but there is still no reaction on the screen or low light. There are two ways to check if your Mercedes Radio display is bad or broken. One checks the loose connection and the other removes it from the car and connects it externally to the power supply and system input.
Try these two methods before spending money on replacing this part of the unit. For some people, this may seem expensive, in which case you can get help from Mercedes Service Centers. But when it comes to replacement LCD panels it is cheaper. But the installation may take an hour or two for DIYer. We recommend doing this with Mercedes service centers for a simple and foolproof solution.
Conclusion
Note that there is a fuse for display in the rear of the Mercedes unit. If the fuse breaks, it will take the display out and the radio will not work. And there are a lot of issues that cause the display to not work. The good news is that you are lucky enough to be able to repair your broken or damaged screen on your own. This is because of our easy step-by-step guide. It will only take an hour or two and if DIY is not your thing. .Then we suggest doing this from the Mercedes Service Center. Hope this article will help you a lot. Be sure to leave your feedback in the comment box.